Know Your Corrosion Rate Instantly
Real time corrosion rate monitoring for finished drinking water. The InstantMPY analyzer displays your corrosion rate in mils per year, updated every 60 seconds.
Why it matters
One reading every 60 seconds, not one every 90 days.
A corrosion coupon gives you a single averaged number after 90 days in the water. An InstantMPY analyzer gives you a fresh corrosion rate reading every minute, so you can see changes as they happen and react while it still matters.
Corrosion is not static.
For many utilities, corrosion rates climb as much as 40 percent between February and September. Real time data lets you match your corrosion control program to the water you actually have today, season by season.
Optimize chemical feed with confidence.
Watch how pH adjustment and inhibitor changes move your corrosion rate, document the results, and dial in feed rates. Utilities use InstantMPY data to cut chemical costs while holding corrosion rates at target.
- Providing corrosion rate data to over 300 water utilities
- More than 40 years of experience in drinking water corrosion control
- Measurement method recognized by ASTM International (ASTM G96-90, Test Method B)
- Trusted in water systems from South Carolina to California
Products
CM2012
Laboratory corrosion monitoring system. Real time display, 2 electrode LPR probe.
$2,995
XM2020
SCADA linked corrosion monitoring for in-system use. 3 electrode probe, 4-20 mA HART output.
$4,995 plus probe
Try it free for 30 days.
We make it easy: shipping included, contactless setup. Plug in the power cord, place the probe in a beaker of running water, and watch your corrosion rate appear.
WaterWorx blended phosphates provide effective corrosion control.
worxblends.com (opens in a new tab)
(opens in a new tab)